switch power supply 35w electric inverter power 12v

1. good quality and competitive 2. 100% full load burn-in test 3. Approved CE, ISO 9001 certificates 4. 2 Years Warrant

25W Single Output Switching Power Supply S-25-12

Features :

Universal AC input / Full rangeProtections:Short circuit/Over load/Over voltageCooling by free air convection100% full load burn-in testFixed switching frequency at 56KHz1 years warranty

 

12V 2.1A Switching Power Supply S-25-12 Specification:

MODEL		S-25-12
OUTPUT	DC VOLTAGE	12V
	RATED CURRENT	2.1A
	CURRENT RANGE	0 ~ 2.1A
	RATED POWER	25.2W
	RIPPLE & NOISE (max.) Note.2	100mVp-p
	VOLTAGE ADJ. RANGE	10.8 ~ 13.2V
	VOLTAGE TOLERANCE Note.3	±1.0%
	LINE REGULATION	±0.5%
	LOAD REGULATION	±0.5%
	SETUP, RISE TIME	300ms, 50ms/230VAC        800ms, 50ms/115VAC at full load
	HOLD TIME(TYP.)	90ms/230VAC      12ms/115VAC at full load
INPUT	VOLTAGE RANGE	85 ~ 264VAC     120 ~ 370VDC
	FREQUENCY RANGE	47 ~ 63Hz
	EFFICIENCY (Typ.)	76%/115VAC
	AC CURRENT(Typ.)	0.6A/115VAC      0.35A/230VAC
	INRUSH CURRENT(max.)	COLD START 13A/115VAC           25A/230VAC
	LEAKAGE CURRENT	<0.75mA / 240VAC
PROTECTION	OVERLOAD	105 ~ 150% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed.
	OVER VOLTAGE	13.8 ~ 16.2V
		Protection type: Hiccup mode, recovers automatically after fault condition is removed.
ENVIRONMENT	WORKING TEMP.	-10 ~ +60ºC
	WORKING HUMIDITY	20 ~ 90% RH non-condensing
	STORAGE TEMP., HUMIDITY	-20 ~ +85ºC , 10 ~ 95% RH
	TEMP. COEFFICIENT	±0.03%/ºC (0 ~ 50ºC)
	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)	SAFETY STANDARDS	Design refer to UL1012, TUV EN60950-1
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
	EMI CONDUCTION & RADIATION	Compliance to EN55022 (CISPR22) Class B
	HARMONIC CURRENT	Compliance to EN61000-3-2,-3
	EMS IMMUNITY	Compliance to EN61000-4-2,3,4,5; ENV50204, EN55024, Light industry level, criteria A
OTHERS	MTBF	330.8K hrs min. MIL-HDBK-217F (25ºC)
	DIMENSION	99*97*36mm (L*W*H)
	PACKING	0.33Kg; 60pcs/21.94Kg/0.0326CMB
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance: includes set up tolerance, line regulation and load regulation.4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

switch power supply 35w electric inverter power 12v